Hoods

• Because this is a large item, it is only sold within the United States.
• Compatibility: Our heat dissipation hood is compatible with 2018-2024 Jeep Wrangler JL JLU and 2020-2023 Gladiator JT models & 2007-2018 Jeep Wrangler JK JKU.(Not for Mojave&392 Model )
• Superior Heat Dissipation: Experience enhanced cooling performance with our upgraded heat dissipation hood. It effectively channels heat away from your engine, keeping it running at optimal temperatures even during intense off-road adventures or high-performance driving.
• Improved Engine Efficiency: By reducing heat buildup under the hood, our heat dissipation hood helps improve overall engine efficiency. This can lead to better fuel economy, increased power output, and extended engine lifespan.
• Durability and Quality: Crafted from high-quality materials, our heat dissipation hood is built to withstand the toughest conditions. It is designed to resist corrosion, fading, and impact, ensuring long-lasting performance and aesthetic appeal.
• Stylish Design: Elevate the look of your Jeep with our space-capsule style heat dissipation hood. Its unique design adds a touch of modern and aggressive flair to your vehicle, setting it apart from the crowd.
• Optimal Ventilation: The carefully designed vents on our heat dissipation hood facilitate efficient airflow, promoting better ventilation and heat dispersion. This helps maintain lower under-hood temperatures, reducing the risk of engine overheating.
  

Application：Compatible with 2018-2023 Jeep Wrangler JL JT

Package Includes

1pcs x Heat Reduction Hood

1 set of Necessary Screws

2 pieces front air intake grille

1 piece anti-shock rubber block

1 piece side radiator grille

Material

high quality steel alloy construction for reliable performance on and off road

Installation

The Installation of the heat reduction hood are with necessary screws, which can easily install without modification or drilling for a clean direct forward installation.

Dimensions: 62.59 x 44.7 x50.3 inches 63.93pounds

1. As shown in the figure, remove the original hood and in-

stall the original hood's accessories onto the new hood

2.Tear off the 3M tape and stick the vents on the left and right sides on the hood

Fix the air intake shield with screws

3. Install the new hood on the jeep and tighten the fixing screws

4.Install the water spray hood pipes

5. Install the hood anti-alarm sensor pad

6. Installation completed

Features:

• Because this is a large item, it is only sold within the United States.

• Design Style:This hood features the 10th Anniversary Edition design style, giving your Wrangler a unique look. It adopts a streamlined and sporty shape to make your vehicle more fashionable and personalized.
• Heat dissipation: This engine cover has excellent heat dissipation design, which can help effectively reduce engine temperature. It is equipped with multiple cooling holes and vents to provide good air flow to help dissipate heat and maintain the normal operating temperature of the engine.
• Durable Material: This JK Hood is made of high-quality materials, which is highly durable and corrosion-resistant. It can withstand harsh road conditions and harsh weather conditions, ensuring a long service life.
• Installation: This hood is fully compatible with the original car. It uses the original screw hole locations and does not require any modifications or additional installation steps.
• Application:The unique 10th Anniversary-style hood adds a stylish and personalized touch to your 2007-2018 Wrangler JK. It combines futuristic elements with adventurous spirit, making your vehicle stand out from the crowd.
  

Features:

• Because this is a large item, it is only sold within the United States.

• 【Fitment】Compatible with 2007-2018 Jeep Wrangler JK JKU.
• 【Superior Ventilation】Maximize your Wrangler's performance on and off road by improving heat management. This JK hood features extra large vents to help heat escape quickly and maintain optimum operating temperatures in your engine compartment.
• 【Steel Alloy Construction】Manufactured from precision cut and molded stamped steel for a sturdy, lightweight replacement hood and is coated with a rust inhibitor E-coating and is ready for pre-paint prep.
• 【Easy to Install】No Drilling Required. Direct Bolt-On Factory Hinge. Use Factory Latch. The hood comes with black primer electrophoretic coating.
• 【100% Satisfied Service】Buy with confidence! Any manufacturing defects and damage during delivery will be backed by our customer service.

Product Description

 

• MAIKER OFF ROAD is acknowledged for its superior quality and outstanding design for Jeep Wrangler Accessories.And our brand positioning in the jeep owner to meet the needs of clients in the fashion and function in varying degrees of demand.
• MAIKER have the strict QC and ERP platform and the products have passed ISO9001: 2000 certification. The design of the products is aim to show your personality and attitude on the basis of the high- quality by combining the most current elements.The only constant is the strict requirements on product quality.

 

Aggressive Styling and Superior Ventilation

Ensure superior heat management when traveling off road with the avenger style heat reduction Jeep Wrangler hood. Designed to help heat escape quickly and maintain ideal operating temperatures in your engine bay. Adding value and enhance the appearance and making your Jeep Wrangler JK stand out in the growing crowd of look-a-likes in the meantime.

Wrapped in any color to match your Jeep's color

You can paint the hood according to your Jeep's color, making your Jeep different.Your jeep can run more efficiently because Maiker Avenger Hood comes with open air vents to provide better Ventilation and increase engine cooling

Installation

The Installation of the avenger style heat reduction Jeep Wrangler hood are with necessary screws,which can easily install without modification or drilling for a clean direct forward installation.

Step 1: Pull out the pipe of the connecting machine

Step 2: Dismantle the parts of the cover

Step 3: Replace the new cover,alignment hole position installation

Step 4: Don't tighten the screw first, convenient regulator cover

Step 5: The hood is aimed at the four corners of the body

Step 6: Screw down the hood screw

Step 7: Install the accessories on the cover

Application

2007-2017 Jeep Wrangler JK JKU Unlimited Rubicon

Material: high quality steel alloy construction for reliable performance on and off road

Dimensions: 46.8 x 59.4 x 38.7 x 3.9 inches

Package Includes

1 x The Avenger Style Heat Reduction Hood

• Because this is a large item, it is only sold within the United States.
• Superior Heat Dispersion:Enhance your Wrangler's performance both on and off the road with improved heat management. This JL hood is equipped with generously sized vents that facilitate rapid heat dissipation, ensuring your engine compartment maintains optimal operating temperatures.
• Durable Steel Alloy Construction:Crafted from precision-cut and molded stamped steel, this replacement hood offers a sturdy and lightweight solution. It is coated with a rust inhibitor E-coating, providing added protection against corrosion. The hood is also prepped with a black primer electrophoretic coating, ready for pre-paint preparation.
• Effortless Installation:No drilling required! Simply utilize the direct bolt-on factory hinge and use the factory latch for a hassle-free installation process. The hood comes with a sleek black primer electrophoretic coating, ensuring a seamless fit and finish.
• UNIQUE LOOK: The Avenger Style hood gives the Wrangler JL JLU and Gladiator JT a unique look that sets your vehicle apart.
• Compatible with 2018-2023 Jeep Wrangler JL JLU & 2020-2023 Gladiator JT.(Not for Mojave&392 Model),the hood ensures a seamless fit. The hood's dimensions and interfaces are identical to the original, requiring no additional modifications or adjustments during installation, preserving the original appearance and structural integrity.

Features:

• Because this is a large item, it is only sold within the United States.
• 【Fitment】The 10th Anniversary Edition Metal Hoods Compatible with 2018-2025 Jeep Wrangler JL JLU & Gladiator JT 2020-2025,Not Fit Mojave and 392 Models.(Note:Please prepare the paint and tools yourself. Due to the differences in each vehicle, please test the engine hood before making any modifications, as modified products cannot be returned)
• 【𝐔𝐩𝐠𝐫𝐚𝐝𝐚𝐭𝐢𝐨𝐧 𝐒𝐭𝐞𝐞𝐥 𝐀𝐥𝐥𝐨𝐲 𝐂𝐨𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧】Manufactured from precision cut and molded stamped steel for a sturdy, lightweight replacement hood and is coated with a rust inhibitor coating and is ready for pre-paint prep.High quality materials and excellent technology allow you to use with confidence.
• 【𝐍𝐨𝐧 𝐃𝐞𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐯𝐞 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】The Wrangler JL JLU Vented Heat Dispersion Hood no drilling required. Direct Bolt-On Factory Hinge. Use Factory Latch. The hood comes with black primer electrophoretic coating.Has the effect of anti-corrosion and rust prevention.
• 【𝐑𝐚𝐩𝐢𝐝 𝐇𝐞𝐚𝐭 𝐃𝐢𝐬𝐬𝐢𝐩𝐚𝐭𝐢𝐨𝐧】The Gladiator JT hoods features extra large vents to help heat escape quickly and maintain optimum operating temperatures in your engine compartment.

Product Description

Upgrade your Jeep Wrangler JL, JLU, or Gladiator JT with the 10th Anniversary Edition Ventilation and Cooling Hood—a perfect blend of performance, durability, and aggressive styling.

5 Reasons Why You Need This Hood

1.Superior Engine Cooling & Performance Tackle extreme off-road conditions with confidence! The functional heat-dissipating vents and open-air hood scoop significantly reduce engine temperature, preventing overheating and improving overall performance.

2.Heavy-Duty, Built to Last Made from high-quality steel, this hood is tough enough to handle rugged terrains and harsh weather, ensuring long-term durability without compromising on style.

3. Hassle-Free Installation No drilling, no modifications—just a direct bolt-on fit that seamlessly replaces your factory hood using existing mounting points. Get a pro-level upgrade without the headache!

4.Aggressive & Eye-Catching Design Turn heads wherever you go! The bold, rugged styling of this hood transforms your Jeep into a statement of power, making it stand out both on and off the road.

5.Rust & Corrosion Resistant Worried about wear and tear? This hood comes with an electrophoretic coating, providing excellent rust protection while allowing easy customization with paint or wraps.

Advanced Ventilation & Heat Dissipation

Engine heat is the enemy of performance—but not anymore! The functional open-air hood scoop and strategically placed heat-dissipation vents significantly enhance airflow, reducing engine temperature and preventing overheating. Whether you're pushing your Jeep to the limit on intense trails or navigating through hot climates, this high-performance cooling system ensures better efficiency and longer engine life. With improved ventilation, your Jeep stays cool under pressure, delivering optimal performance no matter the challenge.

Bold & Aggressive Appearance

Give your Jeep a rugged and eye-catching transformation with this 10th Anniversary Edition Hood. Designed for Jeep enthusiasts who crave a bold, customized look, this hood features a muscular, high-clearance structure that adds an unmistakable off-road-ready presence. The integrated heat-dissipation vents enhance not only performance but also style, giving your vehicle a fierce, battle-ready stance. Whether you're cruising through city streets or dominating rough trails, this hood ensures your Jeep turns heads wherever you go.

Premium-Grade Quality

Crafted from high-quality steel, this hood is designed for maximum strength and durability, making it perfect for both daily drivers and hardcore off-road warriors. Unlike lightweight or plastic alternatives, this heavy-duty hood withstands harsh environments, extreme weather, and rugged terrains without bending or warping. It also comes with an electrophoretic coating for superior rust and corrosion resistance, ensuring longevity and top-notch protection against the elements. Whether you're tackling muddy trails, sandy dunes, or rocky mountains, this hood is built to endure every adventure you take on.

• 【Enhanced Safety】This hood latch is designed to be sturdy, effectively preventing accidental opening of the hood and improving driving safety.
• 【High Quality 】Made of high-quality heavy-duty aluminum alloy and carbon fiber, it has excellent corrosion resistance, high temperature resistance, and durability.
• 【Showcasing Personalized Aesthetics】The uniquely designed hood latch will meet the desire of Jeep enthusiasts to personalize their Jeeps, making your jeep's appearance cooler and sporty style more fashionable.
• 【Easy to Install】Our hood catch No drilling required, Directly replace the original latches. Just use the attached tools to replace the original ones which are not good enough.
• 【After-Sales Service】If you have any product problems, please contact us in time and we will reply to your message within 24 hours.