ATV/UTV

• STURDY OFF-ROAD MOUNT High-quality aluminum alloy material. Corrosion and impact resistance, strong and durable. Capture your adventures perfectly with your action camera with the sturdy UTV mount.
• SIMPLE AND QUICK INSTALLATION The design allows you to easily loosen or tighten the mount without using any tools. The exceptionally strong grip will protect your device through the rough terrain.
• DESIGNED FOR UTV/ATVs Tailored to fit roll cage of Polaris Can-am Kawasaki Yamaha All models of 1.75"-2" Roll Bar. The camera holder compatible with GoPro Hero 9 8 7 6 5 4.
• VIEW YOUR CAMERA AT ANY ANGLE Rotatable handlebar camera mount compatible with GoPro. Thanks to the 360 degrees ball-head, the mount can be flexibly tuned to display at an optimal viewing angle.
• WHAT YOU'LL GET A rugged and reliable camera mount for mountain biking, motocross, seat poles, water sports and other outdoor action activities. If you got any problem with our products, feel free to contact us.

Fitment:

Fits most of UTV ATV with a 1.75"-2" round roll bar

Compatible with XiaomiYI/4K

Compatible with LD4000/6000

Compatible with Insta360 ONE R

Compatible with DJI Osmo Action

Compatible with SJ 5000/6000/7000

Compatible with GoPro Hero 9/8/7/(2018)/6 Black

Compatible with GoPro Hero 5 Black, Session 5/4,4 Silver,3+

Compatible with AKASO/Campark/Crosstour/APEMAN action camera

For 1.75"-2" Rorr Bar

Tailored to fit roll cage of Polaris Can-am Kawasaki Yamaha All models of 1.75"-2" Roll Bar. Non-slip and stable, allowing you to enjoy shooting.

360° adjustable

Rotatable handlebar camera mount compatible with GoPro. Thanks to the 360 degrees ball-head, the mount can be flexibly tuned to display at an optimal viewing angle.

Premium Connector

The connector of the UTV camera mount can tightly connect the camera and the mount, so that the camera can be stabilized to complete the shooting.

Features:

• 【Fitment】This fire extinguisher mount holder are compatible with UTV Polaris Kawasaki Can Am Maverick Kymco Arctic Cat and almost all automotive, RV, and kitchen etc.
• 【Material】This fire extinguisher bracket is made of high hardness ABS instead of easy torn cloth, durable and sturdy, no rust.
• 【Easy Installation】Easy to install, one hand pull the knob out horizontally, the other hand pull the fire extinguisher vertically. Attach the fire extinguisher bracket to the roll rack by adjustable rings,no drilling.
• 【About Design】Holding your fire extinguisher firmly in safe on the rough road. It can use as a fire extinguisher holder and a bottle holder for water bottles.
• 【Package Inclued】1x fire extinuisher holder (base and separable holder) ; 2x adjustable rings ( for holding fire extinguisher .); 2x mounting bracket(fire extinguisher and the rest for mounting the device onto your roll bar).

Quick Release Roll Bar UTV Fire Extinguisher Mount Bracket

Compatible with most of vehicle(UTV Polaris, Kawasaki, UTV Can-Am Maverick, ATV, Kymco Arctic Cat and Bobcat)

Fits for 1.75"-2" Roll Bar and tube

The clamp's diameter :3 inch-4 inch

---

Material Copper	Voltage 12 Volts
Fit Type Vehicle Specific Fit	Vehicle Service Type UTV

Features:

• 【Compatible with】The vast majority of UTV.For example Polaris Ranger, RZR, RZR XP, Pro XP, General, Can-Am Maverick, X3, Defender, Commander Arctic Cat, Yamaha Rhino, ect.Please pay attention to the model before buying.
• 【Loud Horn】12V, 510HZ. Enough noise to alert other pedestrians and vehicles.Loud UTV Horn sounds like an automotive horn, very loud, support short press and long press. Widely fit in sport, multipurpose and utility.
• 【Switch】Electric Horn Kit with button match the rocker switch, flexible switch, rocker switch, press and automatically up, laser etching LED switch.
• 【Esay to Install】 12V Universal UTV Horn Kit, Horn Wiring Kit with Button with relay, including snail horn, plug, interface, fuse, switch, Installation instructions，no need to buy additional products.Direct plug and play. This new horn kit makes your daily driving more convenient.
• 【Warranty】12v horn kit has been tested and tested before reaching your hand, so the quality can be trusted.We provide a one-year warranty. If you are not satisfied with the product, please contact us as soon as possible and we will solve the problem immediately.

MAIKER UTV horn kit for RZR 570, RZR XP 1000, RZR 900, Pro XP, Ranger 1000, Maverick X3 and so on.

Compatible with Polaris RZR series / PRO XP series / General series / Ranger series

Compatible with Arctic Cat Wildcat / Prowler / Trail

Compatible with Can Am Maverick / Commander Max / Defender / Outlander

Compatible with Kawasaki Teryx 4 / Teryx 800 / Teryx 750 / 600 / Mule

Compatible with pioneer 1000 / Pioneer 700 / Talon 1000 / Rincon 680 / Rincon 650

Compatible with Yamaha Rhino / Kubota RTV Series / Deere Gat

12V 510HZ horn kit has a clear and loud high pitch beep-beep sound, attracts attention, allows vehicle , animal and pedestrians to hear you before they can see you and pay attention.

Support short press and long press. Widely applicable to many occasions. Replacement UTV Horn Kit has a clear and loud high pitch beep-beep sound, attracts attention, allows vehicle and pedestrians to hear you before they can see you and pay attention.

MAIKER always insists on technology and quality control. This speaker kit is made of high-purity refined copper, which has the functions of low calorific value and good conductivity.

Loud horn kit with LED switch. This UTV horn kit comes with a 78.74-inch long upgrade cable, so you don't have to worry about finding a place to install it in short-range areas. The button harness is pre-wired when the horn kit arrives in your hands

Features:

• Stronger Mount:The bracket made of high-quality steel is sturdy. Compared with plastic brackets, it is stronger than most competitors and is not easy to break
• Water Tight Cables: The harness is made to water resistant to IP67 Standards. Use 4 Gauge High Voltage Batter Cable not 8 gauge power wire like the others
• Easy to Install: The universal car battery charger is easy to install without requiring the drilling and you can ref
• Wide Application: The universal car charging jump post will compatible with Can Am X3 Models 2 or 4 Seats All Models, compatible with All Polaris RZR Models 2 or 4 Seats, compatible with all UTV/ ATV models, car battery jump post start also can be adapted to trucks, race car, travel trailers, tractor, mower, diesel, boat, etc
• If You Are Not Completely Satisfied With Our Product,Contact Us And We'll Back To The Mail Within 24 Hours

Step 1

Connect the battery cable to the bottom of the Car Battery Jump Post and fix

Step 2

Mark and punch holes on the car near the battery.

Step 3

Secure the Car Battery Jump Post with screws.(Use the screws to fix/secure the Car Battery Jump Post.

Step 4

Connect the battery cable to the vehicle battery, and then check if it can be used normally

Intimate Dust Cover Design

The copper posts of this X3 battery post are equipped with dust caps that block mud, water and sand for longer life.

Sturdy and anti-leakage

Our bracket is made of rigid material, which is more durable than other plastic materials, and the bottom is a plastic partition to prevent leakage

Customize Your Installation Location

The Heavy Duty Remote Battery Charger comes with a plastic stand plate on the bottom so you can customize the mounting position you want.

Features:

• Wider applicability：Our Helmet Hanger Fits 1.75"-2" Roll Cage Compatible with ​Polaris RZR XP 1000 570 800 900, Mule 600 3000 4000, compatible with Pioneer 1000, Teryx 4, Rhino, YXZ, Viking, Wolverine, RTV and Wildcat etc.
• Function：This UTV hook accessory provides an extra place to hang your off-road equipment, such as: helmet, earphones, gloves, goggles, walkie-talkie, water cup, etc.
• High-quality materials：Our Helmet Hanger made of high-quality aluminum material,Sturdy and durable, no rust, anti-corrosion withstand most offroad situations.
• Easy Installation：Installation is simple, convenient and fast.Just fix the clip to the Roll Cage and tighten it.
• Package Contents：1 pcs UTV hook and matching screws and tools.If you have any questions, please contact us, we will give you a satisfactory answer

Details: Product Details: 1 PCS UTV hook Colour: Black. Condition:100% Brand New. Wider applicability： Fits 1.75"-2" Roll Cage Compatible with Polaris RZR XP 1000 570 800 900, Mule 600 3000 4000, compatible with Pioneer 1000, Teryx 4, Rhino, YXZ, Viking, Wolverine, RTV and Wildcat etc. Function： Provides an extra place to hang your off-road equipment, such as: helmet, earphones, gloves, goggles, walkie-talkie, water cup, etc. Installation is simple, convenient and fast.Just fix the clip to the Roll Cage and tighten it. High-quality materials： Our Helmet Hanger made of high-quality aluminum material,Sturdy and durable, no rust, anti-corrosion withstand most offroad situations. If you have any questions, please contact us, we will give you a satisfactory answer

EAN: 0768494576011

Package Dimensions: 9.8 x 2.8 x 2.7 inches

Material Polyester, Polyurethane	Vehicle Service Type ATV
Fit Type Vehicle Specific Fit	Ultraviolet Light Protection

Features:

• 【1000D Waterproof & UV Resistant】Our ATV cover is made of innovative heavy-duty 1000D polyester oxford cloth with waterproof PU coating and UV protection coating on the back, which is thicker and more durable than other products. Whether it is windy, rainy, sandstorm or snow, it can protect your ATV from wear and tear
• 【Four-wheel Fasten】Our bottom fixing method sets us apart from all other ATV covers on the market. We employ a four-wheel fastening approach, utilizing clips near each wheel to secure the cover. This ensures a more stable fixation, seamlessly integrating with your vehicle, and preventing it from being blown away by any amount of wind
• 【2 Air Vents & Easy to Store】Keep the air circulation inside the four wheeler cover to prevent frost and keeps seats dry. Includes a handy storage bag so you can fold up the cover and stash it while you are out riding; small enough to conveniently place in your ATV box or backseat of your car
• 【Reflective & Access Tank Zipper】: The 4 wheeler accessory cover is stitched with 2 reflective stripes, offering high visibility in the dark and aiding in perceiving the quad accessories under low light conditions while preventing scratches. An inspection tank zipper panel is incorporated into the 4 wheeler , enabling quick access to refuel your ATV
• 【High-quality rubber band at the bottom】High-quality rubber band can shrink the bottom space of the vehicle as much as possible without leaving any extra space, protecting your ATV in all directions. We think this is an important detail